1
2
6
5
4
3

Previous: Up: Before start working, source Next: OpenFOAM Installation Directory
This is an automatically generated documentation by LaTeX2HTML utility. In case of any issue, please, contact us at info@cfdsupport.com.

In Windows :

In Windows, there is no need to source anything, it is done automatically.

NOTE: If there is a problem with terminal when it is not possible to write commands after starting midnight commander then it can be avoided by deleting last line in bash.bashrc file, which is in directory etc in TCFD installation directory, i.e., C:\TCFD\18.10\cygwin64\etc and manually sourcing TCFD after opening new terminal window by writing

 

source /etc/bash.bashrc.cfdsupport

OpenFOAM Training by CFD Support,   CFD SUPPORT,   info@cfdsupport.com    +420 212 243 883      © CFD support, s.r.o., Sokolovská 270/201, 190 00 Praha 9, Czech Republic

6
2
1
5
4
3

Next: Compressor Tutorial, unwrapped model Up: Compressor Tutorial Unwrap Example Previous: Compressor Tutorial Unwrap Example   Contents   Index

Compressor Tutorial, original model wheel

turbo blade post cfd compressor wheel pressure

Figure: Turbo Blade Post; Compressor Tutorial; The original model mesh – a wheel region. Colored by pressure; OpenFOAM Turbomachinery CFD

OpenFOAM Training by CFD Support,   CFD SUPPORT,   info@cfdsupport.com    +420 212 243 883      © CFD support, s.r.o., Sokolovská 270/201, 190 00 Praha 9, Czech Republic

6
2
1
5
4
3

Next: Flow Rate Boundary Condition Up: Inlet Boundary Conditions Previous: Total Pressure and Velocity   Contents   Index

Flow Rate Family of Inlet Boundary Conditions

Flow Rate family of inlet boundary conditions prescribe the flow rate at the inlet patches. NOTE: In incompressible fluid flow, also the flow rate is like divided by density and may be viewed as a volume flow rate.

Subsections

OpenFOAM Training by CFD Support,   CFD SUPPORT,   info@cfdsupport.com    +420 212 243 883      © CFD support, s.r.o., Sokolovská 270/201, 190 00 Praha 9, Czech Republic

1
2
6
5
4
3

Previous: Operating system language Up: Linux Next: When using GUI:
This is an automatically generated documentation by LaTeX2HTML utility. In case of any issue, please, contact us at info@cfdsupport.com.

Installation

  1. Request the trial version (this step is only needed for TCFD trial version – in case you already purchased the TCFD perpetual version – please skip this step): https://www.cfdsupport.com/turbomachinery-cfd-demo.html
  2. Download TCFD\textregistered TCFD-18.10*.tar.gz
  3. In terminal install it into your favorite directory (e.g. /home/michael/): bash TCFD-18.10v1*.tar.gz -install
  4. Copy two license files (License.key and License.dat) to the directory /home/michael/TCFD-18.10*
  5. Ready to run now!
  6. In a new terminal source the system variables (with every new terminal, or add this to your $HOME/.bashrc for permanent usage): source /home/michael/TCFD-18.10*/OpenFOAM-dev/etc/ bashrc-release
  7. A ready-to-run tutorial can be found in: /home/michael/TCFD-18.10*/TurbomachineryCFD/tutorials/ CFDProcessor/axial-fan-simple Other tutorials can be downloaded from: https://www.cfdsupport.com/download-cases.html

Subsections

OpenFOAM Training by CFD Support,   CFD SUPPORT,   info@cfdsupport.com    +420 212 243 883      © CFD support, s.r.o., Sokolovská 270/201, 190 00 Praha 9, Czech Republic